Master Chief from HALO - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Master Chief from HALO - HueForge
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 83
- Makes
- 1
- Views
- 578
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You can find the files for the single STL and for the Dual STL over here
============================================================
BODY
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA Overture Silk Gold Transmission Distance: 4
PLA Kexcelled Bronze Transmission Distance: 0.8
PLA+ IIID Max Apple Green Transmission Distance: 4.5
PLA Kexcelled Peak Green Transmission Distance: 3.4
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gold
At layer #9 (0.8mm) swap to Bronze
At layer #10 (0.88mm) swap to Apple Green
At layer #12 (1.04mm) swap to Peak Green
At layer #16 (1.36mm) swap to Savannah Yellow
At layer #17 (1.44mm) swap to Cotton White for the rest.
============================================================
MASK :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Esun PLA+ Black Transmission Distance: 0.3
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Magenta
At layer #8 (0.72mm) swap to Orange
At layer #10 (0.88mm) swap to Pure Yellow
At layer #15 (1.28mm) swap to Cotton White for the rest.