Nespresso Vertuo Pod Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spinning rack that holds up to 18 Nespresso Vertuo pods on its sides and as many as you can fit inside.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 61
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A spinning rack for your Nespresso Vertuo pods!
This model can hold 18 pods, 3 on each of its 6 sides, and if you open the lid you can toss some extra ones in there.
You will also need one 608 Bearing in order for the rack to spin and some glue.
- Printing:
Default 0.2mm layer height. I only changed the wall count to 3 and added a 3-loop skirt.
The included 3mf file should work perfectly with any BambuLab printer, no additional modifications are required. You can also change your color preferences in there as well.
I would highly suggest to look at the included 3mf file if you want to make any other modifications
You will need to print each part on a separate plate due to their size. No supports or other special settings are required. I only changed some of the top and bottom surfaces of some parts for aesthetical purposes but they are not required.
- Assembly:
Insert the bearing into the slot in the “Middle Base” and then onto the “Base”, you might want to add some glue to it so that they dont come off whenever you lift the rack up.
Next, just glue the “Pod Rack” to the “Middle Base” and center it with the hexagons.
Insert your Nespresso pods into the slots and you are done!
- Filaments I used:
Base & Middle Base: BambuLab PLA Metal Iron Gray
Pod Rack: BambuLab PLA Matte Sakura Pink
Lid: BambuLab PLA Matte Sakura Pink and PLA Basic Black for the letters
Hope this model is useful to you and let me know if you have any questions or issues.