1 / 2
Enlarged Floppy Dragonfly Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enlarged floppy dragonfly base with space for text.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
We wanted to personalize the Floppy Dragonfly prints we were making to celebrate chartering a new Lions Club, so remixed the Dragonfly Base to add a large flat area for text.
Printed on a MK4, PETG, 0.4 Nozzle, 0.2mm layer height, input shaping on.
Note #1: 0.4 nozzle pretty much requires a bold font at least 6.5mm in height. Also, make sure your filament is nice and dry (the yellow filament wasn't, resulting in stringing).
Note #2: smaller nozzle would probably allow finer/smaller font for the text, but I didn't have time to tune that before the charter event.