1 / 8
Simple Coin Piggybank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple compact coin shaped piggybank.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 17
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple and relatively small coin-shaped PiggyBank. Slot is large enough (33mm x 3mm) to accept the $50 US gold eagle coin. Like traditional PiggyBanks, you'll have to empty a hammer or other destructive tool to make a withdraw.
-----
Printed on an AnkerMake M5C-B in GreyBlue Hatchbox PETG using ~18g filament in 37min 18sec with the following settings: 0.4mm nozzle, 0.25mm layers, 20% grid infill, no supports, stock PETG profile (230C/80C) 100mm/s initial, 200mm/s print & infill, 500mm/s travel, 5000mm/s acceleration.