1 / 3
Gridfinity dashboard module for two M5Stack dials
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity dashboard module for two M5Stack dials
Requires interface plates and magnets to connect to a Gridfinity base plate.
Print bracket on the side.
No support material needed.
You need angled usb-c cables (or just connect power cables)
I used adaptive cubic infill pattern.
I used PLA with a 0.2mm layer height and with a 0.4mm nozzle.
Included is the f3d file
2023-12-23 update v2