1 / 2
Storage bracket for Kobalt Leafblower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts to wall to keep leafblower out of the way but still accessible.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 60
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Designed on F360, sliced with Prusaslicer. I used Prusaslicer modifiers for 30% infill in the arms and 15% in the backplate above the arms. I also increased the infill to 100% around the screw holes for more strength. It's mounted into a stud with a couple of 2.5" #10 screws.
Settings:
Filament Overture PLA
Nozzle 0.6
Layer 0.20mm
Supports none
Fill variable: 30% gyroid, 15% gyroid, 100% Rectilinear
Perimeters 3
Temp 215C