P Bass Pickup Cover Facade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sometimes you have pickups where the covers are glued on but you still want to change the color.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 61
- Makes
- 0
- Views
- 618
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
Depending on your pickups, the screw holes might be placed differently. Luckily these print quickly so just try and see if they fit. These work with my GFS KP p bass pickups.
Print with rectilinear grid support (as in, style: grid, pattern: rectilinear grid) and only on the screw holes. You might have to block supports near the edges so that the supports don't generate on top of the body.
Be careful not to snap off the tabs when removing it from the build plate. I printed it on a PEI plate and tossed it in the freezer once it was done printing to remove it easier. It is extremely thin.