Haute 42/hitbox oval parametric mx keycap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use the step file or Onshape document to make elliptical keycaps for your hitbox.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 84
- Makes
- 0
- Views
- 1,638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Example stl is for a 23x40.6mm, 45deg stem angle. Use #buttonwidth and #ellipseboost for the top sizing. Changing shell #thickness will change a bunch of other model aspects, so be ready to iterate if you do. If the button is hitting your case surface #ovalheight and #keydepth are set incorrectly. Avoid setting #bosswidth above 5.8mm to avoid interference with the switch body. Change #skirtwidth to match the size of circular hole in your case to keep out dust, the sketch will use a value .1mm less. #switchrib and #switchslot will depend on the tolerances of your printing and slicing profile, I set these oversize and iterate. #stemcrossangle should be self-explanatory.
Takes about 5 minutes to print with .28 layer height, .4 nozzle.