1 / 5
Antenna Winder for K6ARK QRP Antenna — image 1
1 / 5

Antenna Winder for K6ARK QRP Antenna

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This will mount the QRP antenna from K6ARK. Allow to use it in situ, or remove it from the winder.

Rating
5 / 5
Likes
29
Downloads
143
Makes
0
Views
1,287
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

I used Orange Prusament PETG. This would work fine with almost any filament.

No supports are needed.

BOM
I used the following parts..:

2 x M3 thread inserts
2 x 10mm x M3 cap head bolts
4 x 3mm washers
2 x 3mm Fork connectors
Small amount of 3mm heatshrink
1 x BNC-F to BNC-F barrel that had a 10.5mm central collar diameter.

The antenna wire and counter-poise wire can each be fitted with a 3mm fork connector and connected to the antenna leads on the screw posts.

I love the portability of Adam's QRP Antenna.

Note: I am NOT affiliated with K6ARK.com in any way other than being a customer and user of Adam's product.



 

Tags