1 / 1
Piggy Bank (money meter)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimal piggy bank with a money meter (prints in different parts). Read the description for montage guide 📖
- Rating
- 4.4 / 5
- Likes
- 163
- Downloads
- 316
- Makes
- 5
- Views
- 4,199
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Parts needed:
You only need to print each model once, in total there are 7 models. You will also need a few materials that cannot be printed:
- 2x elastic rubbers
- Some glue
Assembly:
- First, you glue the 3 different pieces of money levels to the side of the body. The order from top to bottom should be: $ - $$ - $$$.
- Then place the two rubbers onto the hooks of the inside of the main body
- Then slide the base inside the body through the rails. Please notice that the base has 2 hooks. These hooks are for the rubbers, and they need to be facing down. You need to place the rubbers there. The base should be held by the rubbers.
- Next, you just need to glue the arrow at the end of the stick from the base. The arrow needs to be facing the money meter
- And last but not least, you simply have to close the piggy bank with the top part.
Update:
Added a second lid with higher tolerances