1 / 3
Removable Battery Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to make a removable battery tray
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts to make a removable battery tray.
I recommend printing with 0.6mm nozzle and 0.3mm layer height. You will need 4 of the tube holders and 2 of the tube locks. You install two of them horizontally and two vertically, so you can slid in the tray and then lock the tray in place.
Use typical flanged servo screws to hold down the locking component. Designed for a 500 shaft size carbon fibre arrow shaft (0.291" OD). Remix at will for your own arrow shaft size!
Print with PETG, ASA etc.