Nerf Elite dart magazine (5, 8 & 10 rounds)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nerf full length elite dart magazine. Compatible with most blasters (tested on AF Spectrum, NERF Stryfe, Turbine, Echo)
- Rating
- 4.909 / 5
- Likes
- 218
- Downloads
- 2,382
- Makes
- 12
- Views
- 7,251
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Nerf full length elite dart magazine. With a printed spring.
Feature a symmetrical design so you can insert it both ways.
Compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo).
Printing the magazine
Print body, floor plate and follower in whatever material you want.
Printing the spring
For the spring, print in PETG (PLA will lose its springiness very quickly), flat on the bed.
Springs are super dependent on the exact materials and settings. So while the provided springs should work as is, you might have to experiment a bit to get the best results.
You can change the spring stiffness by playing with the horizontal expansion settings to make it thicker or thinner or scaling its width.