Magnetic Drill Chuck Key Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.14 – €1.39 net (excluding VAT)
For file: Magnet Holder (Printer File)_0.15mm_PETG_MK3S_1h32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.53 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holds a drill chuck key to your drill press using a strong magnet.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 137
- Makes
- 4
- Views
- 667
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have a way to store the drill chuck key on my drill press conveniently. Using magnets seemed like the most straightforward approach, as it would mean I could avoid needing to drill into the upper casting.
This design uses a single M4 screw and nut, along with a powerful magnet with a countersunk hole. Then you slap that to the side of your drill press, and bingo, your chuck key has a home.
I also added a triangular hole if you wish to tie a cable or string to the chuck key to prevent you from taking it away from the drill press, setting it down, and immediately forgetting where you left it.
Tips
- Slice for your own needs for best results.
- Magnet diameter is 25mm.
- M4 Screw length was 10mm.