Ender S1 service stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Service stands for the ender S1 and S1 plus printers, such that you can easily put it on it's side, to access the bottom
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 61
- Makes
- 2
- Views
- 515
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These prints easily click on the gantry and base of the ender S1 printers, such that you can easily put it on it's side, and service the lower side of the printer. This can be for example usefull for mainboard access, or mounting new fans or feed on the printer.
Important: Make sure to slide the print bed forward, Otherwise the center of gravity of the printer will be to far back, and the printer will not remain stable in these service stands.
Print the top part twice, and the bottom part once.
Note: the bottom part won't fit the ‘pro’ variant unfortunately.
Note: The height of EnderS1ServiceStandBottom.stl is estimated. I don't own one myself. It is 35.8mm shorter than the EnderS1PlusServiceStandBottom.stl. From pictures the gantry on the regular S1 seems flush with the base. So I decreased the height based on how far the gantry extends on my S1 plus. If you made this for the S1 and it works, please let me know! :)
If you decide to make this model, let me know what you thought of it! I would appreciate some feedback and a make!