1 / 2
Colored personal christmas ornaments (NOT MMU) — image 1
1 / 2

Colored personal christmas ornaments (NOT MMU)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Colored christmas ornaments without MMU. Dia 60mm.

Rating
0 / 5
Likes
2
Downloads
20
Makes
0
Views
151
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

For printing thees parts you do not need multimaterial. it is designed for changing colour manualy by layers in slicer.

Models are prepared in 4 types in two variants( NOname/Name). Models are in diameter 60mm but i printed it also in 45mm.

I used 0.25 nozzle PETG standart settings. Prusa MK3s+ but it is possible to print in also with 0.4 but in this case i recomend do not change diameter of ornaments.

-Instructions for prusa slicer:

change colour: https://help.prusa3d.com/article/color-change_1687

add text: https://help.prusa3d.com/article/text-tool_399460

  • Noname variants are prepared  for direct printing. Only add your colour variants in slicer for corect lyers.
  • Name variants are prepared that you can add text ( Name, nickname etc.) by slicer and than only define colourchange

-for deer i do not create NAME variant.. because i like it withnout it. Maybe if there will be interest i will add it later.

 

I generated also GCODEs for PETG 0,25nozzle NONAME variant

  • one for 100% scale - 30 mm diameter 
  • second for 75% scale - 45mm diameter