30mm shell piggy bank/storage box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.01 – €6.12 net (excluding VAT)
For file: piggy bank_0.4n_0.2mm_PLA_MINI_5h53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.56 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 5.88 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A piggy bank or storage box modeled after a 30mm shell for the GAU-8 Avenger (A-10 Thunderbolt II "Warthog" gun)
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 188
- Makes
- 0
- Views
- 856
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Print settings:
- 0.4 mm width @ 0.2 mm layer height
- for the top and body an (outer) brim is recommended
- you need to add custom supports if you are using piggy bank models without pre-made supports
Versions:
- storage box doesn't have a slot for coins
- single means there is a single cavity inside the shell, which can be accessed by removing either the top or the bottom
- “Normal” models have separate cavities (I prefer it that way)
(left to right) storage box single, storage box, piggy bank single, piggy bank