Stand for Micro SD Card Reader and Pendrive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for Micro SD Card Reader and Pendrive
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 94
- Makes
- 1
- Views
- 315
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello Everyone
I created a Stand for my Micro SD card readers. I am sharing this project, maybe it will be useful to someone. It can also be used for pendrives. At the bottom of the Stand is located there is space for 4 non-slip silicone pad with a maximum diameter of 8mm. The height of the silicon pad I used is 1.5 - 2.5mm. You can buy them in any large DIY store or furniture accessories store for about 1.50 euros for 50 pieces. Their use is not mandatory. If you have a textured PEI board, you can place the model with the top side down as in the photo.
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
Dimensions :
- 80 x 30 x 20mm length x width x height
How to print ? :
- Material : Any
- Layer Height : 0.2mm
- Infill : 10%
- Wall Loops : 2
- Bottom Layers : 4
- Top Layers : 4
- Support : No
- Brim : No