1 / 8
bitsetter for shapeoko
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to build bitsetter for shapeoko. Very cheap, very accurate. You probably already have everything at home.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Use the following standard parts for build:
2x hexscrew M2x12mm
1x hex bolt M10x80mm Stainless Steel
1x brass tube Inner Diameter 10mm Outer Diameter 12mm, 20mm Length
1x microswitch
How to:
- Cut the Hex bolt at 26mm under the Head
- Use a grinder and a Drill.
- Clamp the Screw into the drill and rotate it and use the grinder to give the shape.
- The head should be approx H4mm, D16mm
- Press the brass tube into the printed part
- screw the microswitch to the printed part, use the nut to close the hole
READY.
The bolt should move up and down easily. There should be 0,15mm tolerance between the bolt and the brass tube. The spring force of the microswitch is enough to lift the bolt. After a few runs I can confirm an accuracy of 0.02mm.