Filament dehumidifier / dryer - Cosori CO165-FD Food Dehydrator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament dehumidifier / dryer - components to convert Cosori Food Dehydrator to a printer filament dryer, up to 2.5 kg
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 859
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
See original for description. @ustejski made a very nice design that works well. However, I purchased the Cosori dehydrator because it was low cost and had good reviews, and had to modify the original model's shell and adapt to the center column. I created the models using OpenSCAD, since this is a very parametric design. These are included so it should be reasonably easy to adapt to other similar dehydrators. Also included are bulkhead fittings that guide the filament tube through an enclosure wall.
The filament shell pieces were printed with a brim to hold them down. The 3mf file has all the pieces stuffed onto one build plate, but they obviously have to be arranged differently to print. I was able to rotate them and print them on my Prusa mk3.
Update - the bearings kept falling off, especially after printing a spool of nylon with the filament dryer running at 75 C. An alternate bearing holder with a hole and cap to enable securing the bearing with a M3x20 or M3x25 socket head screw has been added.
Another Update - I bought a 2.5 kg spool of Filamentum PA, and it didn't fit in the dryer. Since I had to print a new shell anyway, I updated the OpenSCAD file with an interior boss where the filament leaves the shell. The previous design just had a hole and it was hard to find sometimes. I also printed it in Polymaker red ABS, mostly because I had it, but I really like the lighter color. The black was too dark when the printer is in a dimly lit area. The spool is so tall in the dryer that the fan blows up too hard and I have to weigh it down with a 5 pound weight to keep the lid on when the 2.5 kg spool is in it, but otherwise is working well, see the third photo.
Yet another update: When I developed the remix for the new Cosori model I improved the customizing feature of the OpenSCAD program for the shell. If you want to use the OpenSCAD program to adjust dimensions, the program in the remix is better documented and the variables make more sense.