1 / 7
Fosmon WavePoint remote case - TPU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
rev. 2023.11.26 (may continue to revise if needed). Fits the rectangular Fosmon remote.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 1
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Material: TPU (I used 95A - and the settings below are for this specific material) - For best results, dry your TPU (45°-65° for at least 6 hours).
Nozzle: 0.4mm
Temp: 223° C
Bed temp: (I used 0, but you can use whatever your printer manufacturer recommends)
Infill density: 10%
Infill pattern: Cross 3D
Walls: 2
Top/bottom layers: 5
Speed: 25mm/s - up to 40mm/s
Retraction: 8mm (at 45mm/s)
Fan: 20%-100%
Build plate adhesion: Skirt (glue stick encouraged)
Support: None
Bridging (Cura): On
Time: 5.5h
Material: ~32g