Moss Bonsai flower pot
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.73 – €0.89 net (excluding VAT)
For file: all_trunk_connectors_0.2mm_PETG_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a "flower pot" for pole moss. A cool combination of modern technology and nature.
- Rating
- 0 / 5
- Likes
- 62
- Downloads
- 134
- Makes
- 0
- Views
- 2,904
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
What do you need?
-650 grams of filament (PETG recommended)
-superglue or epoxy resin (I used this glue.)
-a hair dryer
-pole moss (I bought my moss here.)
-possibly color
-and of course 3d printer (I used this one ;-) )
I use PETG filament instead of PLA because I wanted to prevent the thin branches from deforming.
The branches are printed flat on the print bed and then heated with a hair dryer and bent over a glass. I printed the branches with 10 outlines so that they are solid and do not collapse when heated. All the branches have the same connector so that you can freely choose the position of your branches.
I printed all parts with an original prusa mk3s.
Tree trunk 2 and 5 require minimal support. In the mf3 files is a support enforcer at these points.
I printed the tree trunk 4 and 6 with a brim just to be on the safe. But this may not be necessary. Also saved in the mf3 files
Because the moss is alive, you have to spray it regularly with water and put it in the shade.
Here is a video with assembly instructions: