Lee Bullet Feeder Funnel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a funnel for the Lee Bullet Feeder bullet tube.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 99
- Makes
- 1
- Views
- 563
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a funnel for the Lee Bullet Feeder. The funnel object is sized to fit directly onto the larger clear bullet tube. The medium tube adapter object is for use with the medium size tube.
Print Settings
Set supports to on, resolution to 0.2, infill density to 20%, wall count to 4, and your top and bottom layer count to 6.
I strongly recommend printing in the orientation shown in the images where the objects are grey. This will provide the greatest strength and orientate for easiest printing. Set build plate adhesion type to skirt is adequate. Set the infill to Quarter Cubic, if using Cura.
Post-Printing
Remove the support. Depending on your retraction settings, you may have to clean up some stringing or blobs.