Modular Model Car Display System
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.80 – €0.97 net (excluding VAT)
For file: Top Vertical Section (Printer File)_0.2mm_PETG_MK3S_58m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 58.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A modular system to display 1/24 and 1/25 scale models.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 302
- Makes
- 1
- Views
- 2,011
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to utilize better the space I have to display the model cars I've built over the years. I also wanted to work within the constraints of the MK3 printer, which meant parts couldn't be larger than I could print in that volume.
So, out of those constraints came a module system of vertical supports and horizontal ramps. These press-fit together and allow, in theory, for unlimited stacking, but I'm only brave enough to stack three high. To that end, I designed a piece you can print for the topmost display position.
I predominantly focus on 1/24 and 1/25 scale models thus, these accommodate the scale.
Tips
- Sliced files are for site metrics only.
- Tolerances are intentionally tight in order to make for a friction fit.
- These look best printed with a .4mm nozzle, but you could print them a lot faster with a .8mm.
- I can't recommend using Diecast cars with these. I'm not sure how well they'd be able to support that kind of weight.
Note
In the picture you can see a different ramp design, I abandoned the diamond pattern because it added an inordinate amount of time to printing.