SCX24 Bronco Bumper Relocation Brackets (TPU)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to raise front bumper of SCX24 Bronco. Reduces front body gap, increases tire & ground clearance.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 116
- Makes
- 1
- Views
- 774
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Replacement brackets to raise the front bumper of SCX24 Bronco. Out of the box, there's an ugly gap from the bumper to the body. These brackets are a direct replacement to the factory brackets. Raising the bumper reduces the gap and helps clear tires at full lock and bump
I use flat magnets instead of the velcro to hold the body down, so the gap is even tighter.
Highly recommend printing in TPU, they will work in other material but won't last long. The holes on the frame side are self tapping and the bumper side should be clearance holes, if they need to be opened up.
Printed in TPU @ 0.2mm layer, 4 perimeters. Infill doesn't matter since the perimeter count makes the part solid. Mirror the STL for both sides. Support required as shown.
