1 / 2
Ornate Switch Wall Mount - Made with dongles and charging in mind. — image 1
1 / 2

Ornate Switch Wall Mount - Made with dongles and charging in mind.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This wall mount is slotted to allow the console to rest safely without controllers attached.

Rating
0 / 5
Likes
5
Downloads
79
Makes
1
Views
441
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

I use Ring Fit Adventure to exercise occasionally but use a USB dongle instead of the dock. My previous wall mount didn't hold just the console, so I redesigned it.

This mount is slotted inside to hold the console without controllers attached and notched at the bottom for a USB-C cable to attach to the console. There is a single screw hole in the back that is recessed to prevent the screw from damaging the console. 

Due to the ornamentation, this model should be printed with the large flat side on the bed, with supports enabled. For the ornamentation, I recommend either changing the filament at that layer, or using rub'n'buff. I painted mine, but you don't have to! 

Tags