1 / 5
Kobra Go Spool Holder Upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder upgrade for a Kobra Go using a 3/8"x4" or M10x100mm bolt and 2 6002-2RS bearings.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Onshape model here.
This probably isn't any better than your run of the mill spool holder.
I have only testing the design with a 3/8" x 4" bolt
Parts needed:
| Part | Quantity |
| Screw | 1 |
| Nut | 1 |
| Bushing | 2 |
| Bolt Holder | 1 |
| Bolt Holder Clamp | 1 |
| 6002-2RS bearing | 2 |
| M10x100mm or 3/8" x 4" bolt | 1 |
| M10 or 3/8" nut | 1 |