1 / 1
Easy Material Settings Calibration with Bridge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of A_R_B's fantastic "Easy Material Settings Calibration Piece" with added 18mm long 0.5mm thick bridging test.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 1
- Views
- 217
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Remix of A_R_B's fantastic "Easy Material Settings Calibration Piece" with added 18mm long 0.5mm thick bridging test.
This remix of the original model features:
- print time of 5-10 minutes
- walls are exactly 1.0mm to see over or underflow
- a 45° overhang with a 1.0mm platform that can show warping and if you need to change the filament-fan speed
- Will show any stringing in the tube or between the tube and platform
- a 0.2mm space between the cube and the cylinder which can be checked with a paper if needed
- a 18mm long 0.5mm thick bridging test