Fantasy Arrowhead (1/2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had a really hard time printing @VictoriaHofferson 's fantasy arrowhead I cut it in half for easier printing.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 298
- Makes
- 2
- Views
- 884
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Had a really hard time printing @VictoriaHofferson 's fantasy arrowhead I cut it in half for easier printing and fixed the model a bit to have it lie perfectly flat.
- PLA
- 20% infill
- Supports needed for the shaft
Print 2 and use epoxy glue to glue the 2 halves together and to a 8mm stick / dowel / pencil.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: AMZ3D PLA Black or Grey Post-Printing =============
Print 2 and use epoxy glue to glue the 2 halves together and to a 8mm stick / dowel / pencil.
How I Designed This
Used Meshmixer to separate the shells and plane sliced the model in half.
Category: Costume