1 / 6
Batch sparge mash tun parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable pass through for cooler based mash tun
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I used the following guide to make a cooler batch sparge mash tun:
https://www.homebrewersassociation.org/how-to-brew/building-a-mash-tun-has-never-been-so-easy/
Instead of the keg bung, I made these printables. Everything else follows the guide.
Cooler used is an Igloo 48QT with 25mm thick walls.
The hole was drilled using a 1.5" (~38mm) hole drill.
This makes the thicker section of the passthru ~25x37mm.
Gaskets are printed in TPU, everything else in PETG. I also used food safe RTV to seal everything.