A bicycle wall support
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.74 – €3.35 net (excluding VAT)
For file: Bike_support_0.2mm_PETG_MK3S_3h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.05 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 3.31 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The purpose of this support is to keep the walls free of stains and keep the bike securely in place.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 121
- Makes
- 2
- Views
- 923
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is printed with a PETG filament on MK3S+. It does not need any supports if you print it with the rear side down. I used 0.20mm Quality settings with a 15% Gyroid infill and an extrusion multiplier 1.1 for an extra endurance.