1 / 2
Lian Li 011 Dynamic side panel ~17mm spacer / adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moves the side panel out ~17mm giving clearance for bigger CPU tower coolers such as the noctua nh-d15
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 216
- Makes
- 1
- Views
- 1,801
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I bought a chonky noctua CPU cooler for my 011D only to realize my smooth brain never checked the dimensions of the cooler against those of the case… so here I am making an adapter that moves the side panel out roughly 17mm. ENJOY :)
Print settings :
Infill - 15%
Layer height - .15mm
Supports - none
No rafts or brim. Will print fine with the orientation set in the 3mf file provided.
Improvement todo list:
- Extend chamfer on bottom pieces to be flush with the outer edge of the glass
- Create some rails that will fill the gaps between the glass and the case, and have the individual adapter pieces connect to them