Simple Watering Can
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€13.79 – €16.86 net (excluding VAT)
For file: Watering Can_0.2mm_PETG_ENDER3_16h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €15.32 excluding VAT (range midpoint).
- Weight reported by the author
- 179 g
- Print time reported by the author
- 16.51 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple watering can that get the job done.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a simple watering can design. It has an ergonomic handle for contour gripping. It is intended to be printed with PETG and with support on the buildplate only. The Extruder Temperature is 230 C and the Bed Temperature is 80 C. The infill is 30% with a layer height of .2 mm.