Prusa Lack v2 Enclosure Leg Extenders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am a tall person and find the heights that the Lack tables surface are at are too low for my old sore back so upWeGo
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 132
- Makes
- 1
- Views
- 1,236
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to fit Ikea lack table legs and extend thier height
multiples can stack together.
2 legs and one foot is the same height as one ikea lack leg so you can mix and match as you see fit (foot is optional)
Designe to print with 5% infill (gyroidal) and withth triangle internals pointing UP
the triangles contain the infil where reqired for support while printing or standing as a leg and minimise unneccisary print time..
(basically use airspace to my advantage and provide structer wehre required)
.1mm tolerance in design for fit. so if your printer is not that tolerant increase print size scale by a small 1% or something.