1 / 2
Vertical P-Mag/Hochul Mag Coupler — image 1
1 / 2

Vertical P-Mag/Hochul Mag Coupler

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines.

Rating
0 / 5
Likes
40
Downloads
327
Makes
0
Views
1,839
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Vertical P-Mag/Hochul Mag Coupler by Qwerm

A series of vertical mag couplers designed for P-Mag's and 3D printed Hochul magazines. Designed for use in states that limit you to 10 round magazines. Couple two 10 round magazines to have a quick reloading set-up in the size of a 30 round magazine.

Orientation: Print with the hole facing down. Make sure you have good bed adhesion. Include a support blocker covering the top half of the print.

Settings Used: 
Material: PLA+
Extruder Temp: 60c
Bed Temp: 210c
Layer Height: 0.20mm
Wall Line Count: 5
Infill Percentage: 50-100%
Support: Yes
Support Structure: Tree
Support Placement: Touching Buildplate
Fuzzy Skin: Disabled

Credit to Remnants for the Hochul Mag.

Tags