1 / 3
360-o-banks
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.41 – €0.50 net (excluding VAT)
For file: vis x30 (2x)_0.3mm_PLA_MK3_32m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.46 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 32.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
piggy banks ball in dodecahedron. Around 150 mm diameter. 360° inserts for coin.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
360° insert coins, around 150 mm diameter, all mounted and printed.
HOW TO:
- 1- print all pieces.
- 2- mount the “Y” on bottom with one screw not strong and the 5 others pentagons under.
- 3- the same for bottom, place the 5 restant “Y” to assembling the top and bottom.
- 4- screw the inserts with a big coin.
Enjoy !