Tush 3kg spool holder for 626 bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tush 3kg spool holder for 626 bearings
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Tush the ultimate spool holder but for 626 bearings.
Done it in fusion from scratch based on the Tush design.
The curves are different, dimensions are slightly different, but it works the same.
Printed with PETG and tested, works great with a 3kg spool.
Printed it very slow 15mm/s and hot 260C (but 245-250 would be better with petg), 100% aligned rectilinear fill, 0 degrees fill angle, 3 perimeters, the print settings were based on "How To Print Glass" by Rygar1432 to give the knobs strength so it can hold the heavy spool even tho it's printed on it's side, so it pushes against the layers.
I couldn't break them off with my hands pushing against them with full force, really strong layer adhesion, I recommend the print settings by Rygar1432 here https://www.thingiverse.com/thing:4062101
I did made adjustments on those settings tho, but it's a good base.
I made a quick video to show that it works, here: https://www.youtube.com/watch?v=vvh5dbxNvqY