Disc Grinding Machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grinding machine with abrasive discs - discs D75 mm x 2, with diamond discs D80 mm x 2 or D100 mm x 2
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 47
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Mini grinding machine with two 75 mm diameter discs. Use 75 mm diameter discs on both sides. D8 x 150 mm shaft.
Mini diamond sharpener with two 80 or 100 mm diameter discs on both sides.
Don't forget to change the guard for the installed disc. D8 x 200 mm shaft.
I glue the 110C 16A thermostat KSD9700 to the motor with hot glue - silicone rubber 704. Provide protection against overheating.
The list of parts is in the original link to the model - https://www.thingiverse.com/thing:4304240
Fastening
Parts: M2.5 screw + brass nuts on the solder. Motor: M5 + brass nuts on the solder. Discs: M3 + brass nuts on the solder/
remark:
1. When installing the felt disc, vibration may occur. https://aliexpress.ru/item/32919440039.html?spm=a2g2w.orderdetail.0.0.340f4aa6d8p9v7&sku_id=65982727518
To install the polishing disc more accurately, you need to hold the machine with your hand. A speed controller and a 4.5V-35V DC module are required. The speed controller is connected to an external power supply.
DC-DC 4.5V-35V Module
2. Diamond wheels - inner hole 20 mm.
To eliminate the vibration of the discs, it is necessary to grind the flange shaft.
The inner hole in the diamond discs is 20 mm. The outer diameter of the flange is 20.2 mm. The flange is installed on the shaft, and when it is rotated, the excess plastic is removed using a utility knife blade. This eliminates the play in the diameter of the sleeve.
After these steps, I was able to achieve an acceptable result.
Most of the parts are made of PETG. 100mm diamond wheels have a lot of weight and inertia. To increase the strength, the wheels and nuts are made of ABS GF. I used a 0.4 nozzle for PETG and a 0.6 nozzle for ABS GF
V4 and V5 flanges have the same thread and are interchangeable.