ZXBaremulator ZX Spectrum Case Raspberry Pi Insert/Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for a 48k ZX Spectrum to hold a Raspberry Pi 3A+ for the ZXBaremulator Mini Emulator
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 89
- Makes
- 0
- Views
- 1,663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Insert for a 48k ZX Spectrum to hold a Raspberry Pi 3A+ for the ZXBaremulator Mini Emulator (https://zxmini.speccy.org/en/index.html). Space for two PCBs so you can hook up a real keyboard.
It is a very tight fit especially at the back where the HDMI plug is pushed down slightly by the case. As the bottom of the insert is very thin it bends very slightly to accommodate.
Includes blanking plates for all the holes and a button mount where the 9V jack normal goes to accommodate the alt Keyboard mode switch.
Parts Needed:
-8x Diodes (1N4148)
-ZX Spectrum Keyboard Membrane Connectors (eBay)
-Ribbon Cables
-2x Single Sided Square Protoboard 25x25mm (CPC Farnell)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Generic PLA Black
Category: Computer