Node 202 / Nitro+ RX 580 Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom Fan Duct for the Sapphire Nitro+ Radeon RX 580 to be used in the Fractal Design Node 202 Small Form Factor Case
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 31
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Node 202 is pretty old but still one of the best flat SFF cases out there, since i repurposed my old Sapphire Nitro+ Radeon RX 580 recently in this case, i needed a custom fan duct
most models out there did not fit or were plain wrong, so i built my own by starting with a small frame template of the Node 202 you can find as a separate download
The Duct is intended to be short, since the cooler is a hybrid “blower” that pushes out air through the backpanel and the front of the card coaxial to the PCIe connector, the right side is open, for exhaust
mounting is done with 4 standard 5 mm screws for PC fans
temps are better than without a duct, but still are on the hotter side - so don't forget to rise the feet or use the case upright
