The Smile Scraper - for double-speed ice scraping
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Your new glove compartment companion that keeps smiling even when it is frosty outside.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 1
- Views
- 168
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Now you can fight your icy windows with a smile!
This little helper scrapes ice of your car's windows in two directions. Push and you will scratch ice, pull and you will scratch ice, too! Get your windows ice-free in half the time.
The smiling head allows a good and firm grip to put force on the ice. The arms protect your fingers of getting covered in crushed ice. And the legs do all the work, no matter if you push or pull your smiling scraper.
There is just one problem - I cannot test this scraper. It is not freezing at my location right now…
Printing is very simple - just print it. I recommend 0.28mm layer height, four walls, five bottoms & tops, 5% gyroid infill and no support. Look at the 3mf file for more details (Bambu Studio or OrcaSlicer).
And now go out and fight some ice!
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.