Delta-P V2-R2 BEAR duct for e3D Volcano
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified duct from teookie's "Delta-P fan duct V2-R2 for BEAR extruder". Lengthened for use with the e3D Volcano block.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 71
- Makes
- 1
- Views
- 652
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
To upgrade from the original e3D V6 heatblock to the e3D Volcano heatblock, the original duct needed to be extended at about midway to accommodate the additional 9.5mm height of the e3D Volcano heatblock.
My v1.0 remix was extended by the same length as the Volcano's additional height of 9.5mm. This left the bottom surface just above the plane of the nozzle face, seemingly less than 1mm. This was too close for comfort in my opinion, so I edited that to lose 1.2mm for a new additional height of 8.3mm. Currently testing that design, and will test another design somewhere in between.
v1.0 adds 9.5mm height
v1.1 adds 8.3mm height
Link to original by teookie: https://www.prusaprinters.org/prints/62524
Print guidelines:
- 0.20mm layer height
- No supports
- Orient for slicing as shown in images
- PETG, ABS, or other high temp material