TwixT "Ingeneous New Strategy Game For Two" published 1962 by Avalon Hill
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.94 – €12.15 net (excluding VAT)
For file: TwixtBoard-3_0.4n_0.2mm_PLA_MK4_9h54m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.04 excluding VAT (range midpoint).
- Weight reported by the author
- 162 g
- Print time reported by the author
- 9.9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The object is simple be the first to connect both your sides of the board and block your opponant from doing the same
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 55
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Most of what you need to know about this game is found at boardgamegeek link below
https://boardgamegeek.com/boardgame/949/twixt
Rules are also found in one of the pictures above. The original game was designed to be split into 4 8"square board sections so it could fit in a cardboard box that was 8.5"x11"x2.25" and be placed on a bookshelf for storage.
The entire project was done using tinkercad and adobe illustrator.
There are two board files that are designed to be printed in 3 colors. a base color, and then two stripes to match the player pieces. you will ned to print two of each. There will need to be a total of 50 of each color link and 50 of each color peg. To simplify things the pegs are designed to be printed in 3 pieces. Print 2 end pieces for each peg and one middle. The ends are designed to fit snugly into the middle pieces without glue, but a small dab at the base of the ends might help. They fit especially well if the ends are printed with a 1mm brim at .015mm separation gap
I've made a prototype test print to check tolerances and hole spacing for a full size board at 8"x8" which should fit on a prusa mk3 or mk4 without any problem. For the mini you will need to scale everything down 87.5% and fix any tolerance problems that result.