1 / 2
Y axis align tool for fixed gantry printers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to help Y axis alignment
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Inspired by 2.4's flying gantry, making gantry partially flying, using bed mesh as indication, manually tune Y axis into one plane.
I use standard voron heatset, modify if needed.
Loosen one rear end of Y axis, use a long M3 bolt to support and adjust the gantry.
Calibrate sequence: z—tilt, then make one mesh, compare z_offset value of two rear corners, if the flying one is smaller, which means the distance between bed and rail is larger（for example，0.1mm）, so unscrew the supporting M3 bolt 1/5 turn. After adjustment, z-tilt and bedmesh, check result, repeat if needed.