1 / 1
Thimble
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament: Designed for PLA
Infill: 10%
Layer hight: First layer 0.3mm, Remaining layers 0.2mm
Nozzle: 0.4
Nozzles temp: First layer 215c, Remaining layers 210c
Bed temp: First layer 60c, Remaining layers 60c
Supports: Yes, Rectilinear
Print time: Approximately 44 minutes
Filament required: Approximately 1.47m
Works on 6 inch beds
Works on not heated beds, with the inclusion of a 4mm brim
Make sure to measure the desired finger, and adjust the thimble size accordingly for an accurate fit.