Mini 13 Clone Trooper (Phase 1)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.64 net (excluding VAT)
For file: Mini13_CloneTrooper_0.15mm_ALL_0.15mm_PLA_MINI_1h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.95 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Minimal Clone Trooper (Phase 1) skin for Soozafone's Mini 13. Head, chest, waist, shoulders and legs.
- Rating
- 5 / 5
- Likes
- 348
- Downloads
- 1,530
- Makes
- 7
- Views
- 5,209
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print your own clone army!
By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature.
The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab. Additional modeling has been done to optimize for printing and to adapt it to the Mini 13 armature.
The print in the pictures has been slightly sloppily painted (sorry) with a permanent marker to add the black details.
Main parts:
- Head/Helmet
- Shoulder (print two of these)
- Chest
- Waist
- Thighs/Upper legs (left and right. they are similar, but mirrored)
- Shins/Lower legs (print two of these)
Accessories/Optional:
- If you need a blaster, download it from my Stormtrooper here:
https://www.printables.com/model/445803-mini-13-stormtrooper
No supports needed. Parts should be printed at 0.15mm. Optionally print the head at 0.1mm for best details.
The rest of the parts are found in Soozafone's Mini 13 Model here:
https://www.printables.com/model/422353-mini-13-printable-jointed-figure
You will need to print the following pieces from this:
- All the frame pieces in mini13-all-frame.stl
- 2 × mini13-armor-foot-2x.stl
- 2 × mini13-armor-arm-2x.stl
Gcode for the Mini+ included for timing and so on, but slice your own for best results.
Credit: This work is based on "Clone Trooper Phase1 (Shiny) [Updated]" (https://skfb.ly/6Sy7F) by Marr Velz is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).