Breakable Piggybank
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.08 net (excluding VAT)
For file: black_4m_0.4n_0.2mm_PLA_MK4IS_4m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
forever breakable piggybank 🐷
- Rating
- 4.455 / 5
- Likes
- 405
- Downloads
- 421
- Makes
- 12
- Views
- 4,824
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
The piggy requires (x28) 5x2mm magnets that are glued in place in a correct orientation.
Please be careful when gluing !
You can break and assemble the piggy as many times as you wish. Feel free to drop on a carpet or wooden flooring. Easily snaps back together 🐖
Print the legs with brim. Print the tail with 100% infill so it doesn't break. Support is not required, but you can use some if you wish.