1 / 2
LED & Perspex Display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A perspex display screen with LED uplighting
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
It's basically just a base (206.5mm wide so you might need to turn off the brim) with a hole for a NeoPixel LED strip, a smaller slit inside that one for a piece of 1.8mm perspex with something mounted on it, and a compartment in the back for a battery, a charger/booster, an on/off switch, and something to drive the LEDs. Here I just used one of those cheap units (about $2) that come with a small RF remote control. I included Dali's signature here, but you can just mount whatever you want. I got a bit messy with the glue, but you get the idea!