Adjustable Phone Stand v3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A new design for a hinge. Iteration from V2 based on the friction hinge mechanism. Smaller, and smoother action.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 338
- Makes
- 6
- Views
- 2,096
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
( This is the sister of https://www.printables.com/model/658410-folding-pocket-phone-stand and the next version of https://www.printables.com/model/654480-adjustable-phone-stand-v2 based on https://www.printables.com/model/658393-friction-hinge-mechanism )
***In order to achieve the correct friction, the square shaft should require significant finger force to insert through the screw slider. If it slides in loosely, then the hinge won't have anything to support itself against. I suggest assembling the hinge first, playing with it to ensure it is stiff enough, and then insert it into the base and holder-part. If it is too lose upon assembly, then very slightly scale the squre shaft and reprint until a good force is obtained. ***
This phone stand uses the same friction hing as the Folding Pocket Phone Stand linked above. It has the same general shape as the Phone Stand V2 also linked above.
The internals of the hinge include a square shaft and channel through the hinge, 8mm diagonal, (the shaft itself has a -0.1mm offset). The screw sliding over the square shaft provides the resistance to motion needed to support a phone.
I will update with better info and photos later, sorry…