voron switchwire octopus mount.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
mount to install a btt octopus board and raspberry pi
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 1
- Views
- 697
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
this model was designed to install a btt octopus board in a BOM voron switchwire. one side mounts to the 3060 rail. the otherside ties into the lrs 350 24 power supply buy replacing the mounts that attatch to the 2020 rail the bed rides on and to the side of the power supply. mound will hold a raspberry pi 3b/4 and if the hole placement is the same the pi 5 . the standoffs for the octopus use voron m3 x 5 x 4 brass heat set inserts.
standard voron print settings.
4 walls, 5 tops, 5 bottoms, .2 layers and 40% infill. no supports
If you like this model buy me a coffee if you wish. Its appreciated not expected
https://paypal.me/jwoody05?country.x=US&locale.x=en_US