1 / 3
Hylian Shield Alignment Pin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made my own alignment pins for this shield. You will need 10 of these. Print at 100% infill and brims on so they…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
I made my own alignment pins for this shield.
You will need 10 of these. Print at 100% infill and brims on so they stay in place. Lay flat on the long side.
All 10 took less than 10 minutes to print on my X1Carbon at standard speed. Nice snug fit.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament: Elegoo PLA Grey
Notes:
Print with brims. 5mm should suffice and easy to peel off.
Category: Props